Safety notice

Read the manuals carefully before using Wellborne products to ensure correct and optimal operation. Keep the manuals in an easily accessible place for future reference.

To ensure the safety of personnel and equipment, certain safety-related information is provided and highlighted in the manual. This safety information is indicated by the following icons. Please read them carefully, and make sure that safety comes first.

Identifies a hazard that could result in serious injury or death if not properly addressed.
Identifies a hazard which, if not strictly observed, could result in equipment failure or loss of property.
High voltage! Risk of shock. Equipment contains energy storage components (capacitor, inductor). For maintenance and repair, please switch off the equipment and wait at least 5 minutes before proceeding.
Grounding rod. Make sure this product is properly grounded to avoid electrical hazards and shocks.

  • Keep flammable materials, explosive materials and flammable vapors away from the charging station.
  • Keep the connector/charging gun clean and dry, and clean it with a dry cloth if it is stained. It is strictly forbidden to touch the metal part of the connector when it is energized. Do not use this product if the power cord or connector is damaged, the insulation deteriorated, or shows any other sign of damage, please inform the staff.
  • Do not attempt to disassemble, repair or modify the product. There are no user-serviceable parts inside. For all technical inquiries, please contact the staff, as incorrect operation may cause damage, water leakage or electrical current leakage.
  • Unplugging the connector/gun during charging is strictly forbidden, as it may result in personal injury and damage to the vehicle.
  • In the event of an abnormal condition, immediately press the emergency stop button, which will switch off all inputs and outputs to ensure the safety of people and equipment.
  • Charging should be carried out with caution in rainy or thundery weather.
  • Keep children away from the charging station, as this could cause injury.
  • Make sure the front and rear doors are closed to reduce the risk of shock and charger malfunction.
  • Charging can only be applied when the electric vehicle is switched off and stationary. To charge a hybrid vehicle, first switch off the engine.
  • The product is fitted with an RCD (residual current circuit breaker) for protection against residual currents. Press the “test” button at least once a month to ensure that it is working properly.

What did you think of this article?
Updated on August 28, 2024

Contact us

Customer and Technical Support

Use our ticket submission form to report a problem or request technical support.